Related Documentation
Configuring the Junos OS to Use ATM Cell-Relay Accumulation Mode on an ATM1 PIC
You can configure an Asynchronous Transfer Mode (ATM) 1 PIC to use cell-relay accumulation mode. In this mode, the incoming cells (one to eight cells) are packaged into a single packet and forwarded to the label-switched path (LSP). At the edge router, this packet is divided in to individual cells and transmitted over the ATM interface.
 | Note: When you configure an ATM PIC to use cell-relay accumulation, all ports on the ATM PIC use cell-relay accumulation mode. |
To configure an ATM PIC to use cell-relay accumulation mode, include the atm-cell-relay-accumulation statement at the [edit chassis fpc slot-number pic pic-number] hierarchy level:
On a TX Matrix or TX Matrix Plus router, include the atm-cell-relay-accumulation statement at the [edit chassis lcc number fpc slot-number pic pic-number] hierarchy level:
