Navigation
Supported Platforms
Configuring the Gx-Plus Partition
Gx-Plus works within a specific logical system:routing instance context, called a partition.
 | Note: Currently, only a single partition is supported; you must configure it within the default logical system:routing instance context. |
Before you configure the Gx-Plus partition, perform the following task:
- Configure the Diameter instance at the [edit diameter] hierarchy level. See Configuring Diameter.
Configuration for the Gx-Plus partition consists of naming the partition and then associating a Diameter instance, the PCRF hostname, and the PCRF realm with the partition.
To configure the Gx-Plus partition:
- Create the partition or specify the name of an existing
partition.[edit access gx-plus]user@host# set partition partition-name
- Specify the Diameter instance for the Gx-Plus partition.
Note: Currently, only the default Diameter instance, master, is supported.
[edit access gx-plus partition partition-name]user@host# set diameter-instance instance-name - (Optional) Configure the destination host for the Gx-Plus
partition.[edit access gx-plus partition partition-name]user@host# set destination-host hostname
- Configure the destination realm for the Gx-Plus partition.[edit access gx-plus partition partition-name]user@host# set destination-realm realm
The following example shows a Gx-Plus partition configuration.
gx-plus {partition partition1 {diameter-instance master;destination-host pcrf1;destination-realm generic.example.com;}}
