Navigation
Supported Platforms
Configuring VRRP for IPv6 (CLI Procedure)
By configuring the Virtual Router Redundancy Protocol (VRRP) on EX Series switches, you can enable hosts on a LAN to make use of redundant routing platforms on that LAN without requiring more than the static configuration of a single default route on the hosts. You can configure VRRP for IPv6 on Gigabit Ethernet, 10-Gigabit Ethernet, and logical interfaces.
To configure VRRP for IPv6:
- Configure VRRP group support on interfaces:
[edit interfaces interface-name unit logical-unit-number family inet6 address address]
user@switch# set vrrp-inet6-group group-id priority number virtual-inet6-address address virtual-link-local-address ipv6-addressYou must explicitly define a virtual link local address for each VRRP for IPv6 group. Otherwise, when you attempt to commit the configuration, the commit request fails. The virtual link local address must be on the same subnet as the physical interface address.
- If you want to configure the priority order in
which this switch functioning as a backup router becomes the master
router if the master router becomes nonoperational, configure a priority
for this switch:
[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]
user@switch# set priority number - Specify the interval in milliseconds in which the
master router sends advertisement packets to the members of the VRRP
group:
[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]
user@switch# set inet6-advertise-interval milliseconds - By default, a higher-priority backup router preempts
a lower-priority master router.
- To explicitly enable the master router to be preempted:
[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]
user@switch# set preempt - To prohibit a higher-priority backup router from preempting
a lower priority master router:
[edit interfaces interface-name unit logical-unit-number family inet6 address address vrrp-inet6-group group-id]
user@switch# set no-preempt
- To explicitly enable the master router to be preempted:
