Navigation
Related Documentation
- M, MX, T Series
- Example: Basic IPv4 Multicast over a Layer 3 VPN Configuration
- Example: Configuring MBGP MVPN Senders and Receivers using PIM SM and RSVP-TE Provider Tunnels
- Example: IPv4 Multicast with Interprovider VPNs Configuration
- M, MX, PTX, T Series
- Example: Configuring MBGP Multicast VPNs
- Example: Configuring MBGP Multicast VPN Extranets
Configuring Provider Tunnels
The source address for a PIM-SM provider tunnel is the loopback address of the loopback interface in inet.0.
To configure a provider tunnel, include the provider-tunnel statement at the [edit routing-instances routing-instance-name] hierarchy level:
[edit]routing-instances {vpn-a {provider-tunnel {pim-asm {apply-groups group-name;apply-groups-except group-name;group-address address;}}}}
Related Documentation
- M, MX, T Series
- Example: Basic IPv4 Multicast over a Layer 3 VPN Configuration
- Example: Configuring MBGP MVPN Senders and Receivers using PIM SM and RSVP-TE Provider Tunnels
- Example: IPv4 Multicast with Interprovider VPNs Configuration
- M, MX, PTX, T Series
- Example: Configuring MBGP Multicast VPNs
- Example: Configuring MBGP Multicast VPN Extranets
Published: 2012-11-15
Related Documentation
- M, MX, T Series
- Example: Basic IPv4 Multicast over a Layer 3 VPN Configuration
- Example: Configuring MBGP MVPN Senders and Receivers using PIM SM and RSVP-TE Provider Tunnels
- Example: IPv4 Multicast with Interprovider VPNs Configuration
- M, MX, PTX, T Series
- Example: Configuring MBGP Multicast VPNs
- Example: Configuring MBGP Multicast VPN Extranets
