Navigation
Supported Platforms
Configuring a Policer for the Complex Configuration
For the complex configuration of Layer 2 policers for pseudowires, create a two-color policer.
To configure a two-color policer:
- Create a two-color policer.
- Specify that the policer is to be used on a logical interface.[edit firewall policer 10m-policer]user@host# set logical-interface-policer
- Configure the policer. [edit firewall policer 10m-policer]user@host# edit if-exceeding[edit firewall policer 10m-policer if-exceeding]user@host# set bandwidth-limit 10m user@host# set burst-size-limit 100k
- Set the action that the policer takes to loss-priority and specify that the packet loss priority (PLP) is high.
