Navigation
Supported Platforms
Configuring the PTSP Partition
PTSP works within a specific logical system:routing instance context, called a partition. The partition is configured to connect to the external policy manager.
 | Note: Currently, only a single partition is supported; you must configure it within the default logical system:routing instance context. |
Before you configure the PTSP partition to connect to the external policy manager, perform the following task:
- Configure the Diameter instance for the remote SRC peer at the [edit diameter] hierarchy level. See Configuring Diameter.
Configuration for the PTSP partition consists of naming the partition and then associating a Diameter instance, the SAE hostname, and the SAE realm with the partition.
To configure the PTSP partition:
- Create the partition at the [edit system services packet-triggered-subscribers] hierarchy level.[edit system services packet-triggered-subscribers]user@host# edit partition ptsp–default
- Specify the Diameter instance for the PTSP partition.[edit system services packet-triggered-subscribers partition ptsp–default]user@host# set diameter-instance master
- Configure the destination host for the PTSP partition.[edit system services packet-triggered-subscribers partition ptsp–default]user@host# set destination-host sae1
- Configure the destination realm for the PTSP partition.[edit system services packet-triggered-subscribers partition ptsp–default]user@host# set destination-realm generic.example.com
- Configure the subscriber ID for the PTSP partition.[edit system services packet-triggered-subscribers partition-radius radius-partition-name]user@host# set subscriber-identification
