Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Configuring SNMPv3 Traps on a Device Running Junos OS
- Configuring SNMP Informs
- Minimum SNMPv3 Configuration on a Device Running Junos OS
- ACX, M, MX, PTX, T Series
- Configuring the Trap Notification Filter
- Configuring the Trap Target Address
- Defining and Configuring the Trap Target Parameters
- Complete SNMPv3 Configuration Statements
- Example: Configuring SNMPv3 Trap Notification
Configuring the SNMPv3 Trap Notification
The notify statement specifies the type of notification (trap) and contains a single tag. The tag defines a set of target addresses to receive a trap. The tag list contains one or more tags and is configured at the [edit snmp v3 target-address target-address-name] hierarchy level. If the tag list contains this tag, Junos OS sends a notification to all the target addresses associated with this tag.
To configure the trap notifications, include the notify statement at the [edit snmp v3] hierarchy level:
name is the name assigned to the notification.
tag-name defines the target addresses to which this notification is sent. This notification is sent to all the target-addresses that have this tag in their tag list. The tag-name is not included in the notification.
trap is the type of notification.
![]() | Note: Each notify entry name must be unique. Junos OS supports two types of notification: trap and inform. |
For information about how to configure the tag list, see Configuring the Tag List.
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Configuring SNMPv3 Traps on a Device Running Junos OS
- Configuring SNMP Informs
- Minimum SNMPv3 Configuration on a Device Running Junos OS
- ACX, M, MX, PTX, T Series
- Configuring the Trap Notification Filter
- Configuring the Trap Target Address
- Defining and Configuring the Trap Target Parameters
- Complete SNMPv3 Configuration Statements
- Example: Configuring SNMPv3 Trap Notification
Published: 2012-12-08
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Configuring SNMPv3 Traps on a Device Running Junos OS
- Configuring SNMP Informs
- Minimum SNMPv3 Configuration on a Device Running Junos OS
- ACX, M, MX, PTX, T Series
- Configuring the Trap Notification Filter
- Configuring the Trap Target Address
- Defining and Configuring the Trap Target Parameters
- Complete SNMPv3 Configuration Statements
- Example: Configuring SNMPv3 Trap Notification