Navigation
Configuring Service Sets for Softwire
You must include softwire rules or a softwire rule set in a service set to enable softwire processing. You must include a stateful firewall rule for DS-Lite.
To configure service sets for softwire:
- Include a softwire rule or rule set in the service set.[edit services service-set service-set-name]user@host# set softwire-rules rule softwire-rule-name
- When using a 6rd softwire, include a stateful-firewall
rule.[edit services service-set service-set-name]user@host# set stateful-firewall-rulessoftwire-rule-name
- You can include a NAT rule for flows originated by DS-Lite
softwires.
Note:
Currently a NAT rule configuration is required with a DS-Lite softwire configuration when you use interface service set configurations; NAT is not required when using next-hop service set configurations. NAT processing from IPv4 to IPv6 address pools and vice versa is not currently supported. FTP, HTTP, and RSTP are supported.
For further information, see “Configuring Service Rules.”
