Navigation
Related Documentation
- M, MX Series
- Overview of Access Routes and Access-Internal Routes Removal After Graceful Routing Engine Switchover
- MX Series
- Access and Access-Internal Routes for Subscriber Management
- Configuring Dynamic Access Routes for Subscriber Management
- Additional Information
- For information about configuring static routes, see the Junos OS Routing Protocols Configuration Guide
Delaying Removal of Access Routes and Access-Internal Routes After Graceful Routing Engine Switchover
In subscriber networks configured with either nonstop active routing (NSR) or graceful restart, you can configure the router to delay for 180 seconds (3 minutes) before removing access routes and access-internal routes for DHCP and PPP subscriber management after a graceful Routing Engine switchover takes place.
To configure the router to delay removal (flushing) of access-routes and access-internal routes after a graceful Routing Engine switchover:
- Specify that you want to configure subscriber management.[edit system services]user@host# edit subscriber-management
- Configure the router to wait 180 seconds before removing
access-routes and access-internal routes after a graceful Routing
Engine switchover.[edit system services subscriber-management]user@host# set gres-route-flush-delay
Related Documentation
- M, MX Series
- Overview of Access Routes and Access-Internal Routes Removal After Graceful Routing Engine Switchover
- MX Series
- Access and Access-Internal Routes for Subscriber Management
- Configuring Dynamic Access Routes for Subscriber Management
- Additional Information
- For information about configuring static routes, see the Junos OS Routing Protocols Configuration Guide
Published: 2012-11-29
Related Documentation
- M, MX Series
- Overview of Access Routes and Access-Internal Routes Removal After Graceful Routing Engine Switchover
- MX Series
- Access and Access-Internal Routes for Subscriber Management
- Configuring Dynamic Access Routes for Subscriber Management
- Additional Information
- For information about configuring static routes, see the Junos OS Routing Protocols Configuration Guide
