Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Download This Guide
Set Clocking to Internal
Purpose
You set clocking to internal because there is no external clock source in a loopback connection.
Action
To configure clocking to internal, follow these steps:
- In configuration mode, go to the following hierarchy level:[edit] user@host# edit interfaces interface-name
- Configure clocking to internal:[edit interfaces interface-name] user@host# set clocking internal
- Verify the configuration:user@host# show
For example:
[edit interfaces t3-1/0/0]user@host# show clocking internal; - Commit the change:user@host# commit
For example:
[edit interfaces t3-1/0/0]user@host# commit commit complete
Meaning
The clock source for the interface is set to the internal Stratum 3 clock.
