Supported Platforms
Using the Junos OS to Configure a T1600 Router Within a Routing Matrix
A routing matrix composed of a TX Matrix Plus router and T1600 routers supports the same chassis configuration statements as a standalone router (except ce1, ct3, mlfr-uni-nni-bundles, sparse-dlcis, and vtmapping). By including the lcc statement at the [edit chassis] hierarchy level, you configure PIC-specific features, such as framing, on specific T1600 routers. In addition, a TX Matrix Plus router has two more chassis configuration statements, online-expected and offline.
To configure a T1600 router that is connected to a TX Matrix Plus router, include the lcc statement at the [edit chassis] hierarchy level:
number can be 0 through 3.
To configure a T1600 router within a routing matrix, include the following statements at the [edit chassis lcc number] hierarchy level:
 | Note: For the FPC slot number, specify the actual hardware slot number (numbered 0 through 7) as labeled on the T1600 router chassis. Do not use the corresponding software FPC number shown in the TX Matrix Plus Router Chassis and Interface Names. |
For information about how to configure the online-expected and offline configuration statements, see Configuring the Junos OS to Enable the TX Matrix Plus Router to Generate an Alarm If a T1600 Router Stays Offline.
