Navigation
Displaying ETH-DM Frame Counts for MEPs by Enclosing CFM Entity
Purpose
Display ETH-DM frame counts for CFM maintenance association end points (MEPs).
By default, the show oam ethernet connectivity-fault-management mep-database command displays CFM database information for MEPs in the specified CFM maintenance association (MA) within the specified CFM maintenance domain (MD).
 | Note: At the router attached to the initiator MEP for a one-way session, or at the router attached to the receiver MEP for a two-way session, you can only display ETH-DM frame counts. |
Action
- To display CFM database information (including ETH-DM
frame counts) for all MEPs in MA ma1 within MD md1:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain ma1 maintenance-association ma1 - To display CFM database information (including ETH-DM
frame counts) only for local MEP 201 in MA ma1 within MD md1:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain md2 maintenance-association ma2 local-mep 201 - To display CFM database information (including ETH-DM
frame counts) only for remote MEP 302 in MD md3 within MA ma3:
user@host> show oam ethernet connectivity-fault-management mep-database maintenance-domain ma3 maintenance-association ma3 remote-mep 302
