Navigation
Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- apply-action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Junos® OS Ethernet Interfaces
Applying an Action Profile
You can apply an action profile to one or more interfaces.
To apply an action profile to an interface, include the apply-action-profile statement at the [edit protocols oam ethernet link-fault-management action-profile interface interface-name] hierarchy level:
[edit protocol oam ethernet link-fault-management interface interface-name]apply-action-profile profile-name;
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- apply-action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Junos® OS Ethernet Interfaces
Published: 2013-04-03
Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- apply-action-profile
- ACX, EX, M, MX, T Series
- IEEE 802.3ah OAM Link-Fault Management Overview
- Configuring IEEE 802.3ah OAM Link-Fault Management
- Enabling IEEE 802.3ah OAM Support
- Configuring Link Discovery
- Configuring the OAM PDU Interval
- Configuring the OAM PDU Threshold
- Configuring Threshold Values for Local Fault Events on an Interface
- Disabling the Sending of Link Event TLVs
- Detecting Remote Faults
- Configuring an OAM Action Profile
- Specifying the Actions to Be Taken for Link-Fault Management Events
- Monitoring the Loss of Link Adjacency
- Monitoring Protocol Status
- Configuring Threshold Values for Fault Events in an Action Profile
- Setting a Remote Interface into Loopback Mode
- Example: Configuring IEEE 802.3ah OAM Support on an Interface
- ACX, EX, MX, T Series
- Enabling Remote Loopback Support on the Local Interface
- Additional Information
- Junos® OS Ethernet Interfaces