Navigation
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- Creating the Maintenance Domain
- Configuring Maintenance Intermediate Points
- Continuity Check Protocol
- Configuring a Maintenance Endpoint
- Configuring a Connectivity Fault Management Action Profile
- Configuring Linktrace Protocol in CFM
- Configuring Ethernet Local Management Interface
- Configuring Port Status TLV and Interface Status TLV
- Configuring Rate Limiting of Ethernet OAM Messages
- Configuring 802.1ag Ethernet OAM for VPLS
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- M, MX, T Series
- Configuring M120 and MX Series Routers for CCC Encapsulated Packets
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- Additional Information
- Junos® OS Ethernet Interfaces
Creating a Maintenance Association
To create a maintenance association, include the maintenance-association ma-name statement at the [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name] hierarchy level.
Maintenance association names can be in one of the following formats:
- As a plain ASCII character string
- As the VLAN identifier of the VLAN you primarily associate with the maintenance association
- As a two-octet identifier in the range from 0 through 65,535
- As a name in the format specified by RFC 2685
The default short name format is an ASCII character string.
To configure the maintenance association short name format, include the short-name-format (character-string | vlan | 2octet | rfc-2685-vpn-id) statement at the [edit protocols oam ethernet connectivity-fault-management maintenance-domain domain-name maintenance-association ma-name] hierarchy level.
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- Creating the Maintenance Domain
- Configuring Maintenance Intermediate Points
- Continuity Check Protocol
- Configuring a Maintenance Endpoint
- Configuring a Connectivity Fault Management Action Profile
- Configuring Linktrace Protocol in CFM
- Configuring Ethernet Local Management Interface
- Configuring Port Status TLV and Interface Status TLV
- Configuring Rate Limiting of Ethernet OAM Messages
- Configuring 802.1ag Ethernet OAM for VPLS
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- M, MX, T Series
- Configuring M120 and MX Series Routers for CCC Encapsulated Packets
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- Additional Information
- Junos® OS Ethernet Interfaces
Published: 2012-12-11
Supported Platforms
Related Documentation
- ACX, M, MX, T Series
- connectivity-fault-management
- Creating the Maintenance Domain
- Configuring Maintenance Intermediate Points
- Continuity Check Protocol
- Configuring a Maintenance Endpoint
- Configuring a Connectivity Fault Management Action Profile
- Configuring Linktrace Protocol in CFM
- Configuring Ethernet Local Management Interface
- Configuring Port Status TLV and Interface Status TLV
- Configuring Rate Limiting of Ethernet OAM Messages
- Configuring 802.1ag Ethernet OAM for VPLS
- ACX, M, MX, PTX, T Series
- IEEE 802.1ag OAM Connectivity Fault Management Overview
- M, MX, T Series
- Configuring M120 and MX Series Routers for CCC Encapsulated Packets
- MX, T Series
- Configuring MAC Flush Message Processing in CET Mode
- Additional Information
- Junos® OS Ethernet Interfaces
