Navigation
Supported Platforms
Related Documentation
- MX Series
- ATM for Subscriber Access Overview
- ATM for Subscriber Access Encapsulation Types Overview
- Configuring ATM for Subscriber Access
- Example: Configuring a Dynamic PPPoE Subscriber Interface over ATM
- Example: Configuring a Static PPPoE Subscriber Interface over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over Ethernet over ATM
- Example: Configuring a Static PPP Subscriber Interface over ATM
Guidelines for Configuring ATM for Subscriber Access
The following guidelines apply when you configure PPP-over-Ethernet-over-ATM (PPPoE-over-ATM), IP-over-ATM (IPoA), IP-over-Ethernet-over-ATM (IPoE-over-ATM), or PPP-over-ATM (PPPoA) configurations for ATM subscriber access. You can create these configurations on MX Series routers with Modular Port Concentrator/Modular Interface Card (MPC/MIC) interfaces that use the ATM MIC with SFP.
For all supported ATM subscriber access configurations:
- Make sure you specify the correct encapsulation type on the ATM logical interface for your configuration, as described in ATM for Subscriber Access Encapsulation Types Overview.
For PPPoE-over-ATM configurations:
- For dynamic or static PPPoE-over-ATM configurations, specify PPPoE-specific options at the [edit interfaces interface-name unit logical-unit-number family pppoe] hierarchy level. Specifying PPPoE-specific options at the [edit interfaces interface-name unit logical-unit-number pppoe-underlying-options] hierarchy level is not supported for these configurations.
- For dynamic or static PPPoE-over-ATM configurations, you must configure the router to act as a PPPoE server (also known as a remote access concentrator). Configuring the router to act as a PPPoE client is not supported in these configurations.
- For dynamic PPPoE-over-ATM configurations, issue the dynamic-profile profile-name statement at the [edit interfaces interface-name unit logical-unit-number family pppoe] hierarchy level to associate the ATM logical interface with the dynamic profile that defines the PPPoE subscriber interface.
For static IPoA and IPoE-over-ATM configurations:
- Specify interface-specific options at the [edit interfaces interface-name unit logical-unit-number family inet] hierarchy level (for IPv4) or at the [edit interfaces interface-name unit logical-unit-number family inet6] hierarchy level (for IPv6).
For static PPPoA configurations:
- Specify PPP-specific options at the [edit interfaces interface-name unit logical-unit-number ppp-options] hierarchy level.
Related Documentation
- MX Series
- ATM for Subscriber Access Overview
- ATM for Subscriber Access Encapsulation Types Overview
- Configuring ATM for Subscriber Access
- Example: Configuring a Dynamic PPPoE Subscriber Interface over ATM
- Example: Configuring a Static PPPoE Subscriber Interface over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over Ethernet over ATM
- Example: Configuring a Static PPP Subscriber Interface over ATM
Published: 2013-02-11
Supported Platforms
Related Documentation
- MX Series
- ATM for Subscriber Access Overview
- ATM for Subscriber Access Encapsulation Types Overview
- Configuring ATM for Subscriber Access
- Example: Configuring a Dynamic PPPoE Subscriber Interface over ATM
- Example: Configuring a Static PPPoE Subscriber Interface over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over ATM
- Example: Configuring a Static Subscriber Interface for IP Access over Ethernet over ATM
- Example: Configuring a Static PPP Subscriber Interface over ATM
