Navigation
Related Documentation
- M, MX Series
- IPv6 Addressing Requirements for a Dual-Stack Network
- Design 1: IPv6 Addressing with DHCPv6 IA_NA and DHCPv6 Prefix Delegation
- Methods for Obtaining IPv6 Global Addresses for DHCPv6 IA_NA
- Selecting the Method of Provisioning a Global IPv6 Address for the WAN Link
- Configuring an Address-Assignment Pool for Use by DHCPv6 IA_NA
Overview of Using DHCPv6 IA_NA to Provide IPv6 WAN Link Addressing
You can use DHCPv6 IA_NA to assign a global IPv6 address to the CPE WAN link. If the CPE sends a Solicit message that contains the IA_NA option to the BNG, the BNG acts as a DHCPv6 server and assigns a single IPv6/128 address to the WAN interface of the CPE.
Related Documentation
- M, MX Series
- IPv6 Addressing Requirements for a Dual-Stack Network
- Design 1: IPv6 Addressing with DHCPv6 IA_NA and DHCPv6 Prefix Delegation
- Methods for Obtaining IPv6 Global Addresses for DHCPv6 IA_NA
- Selecting the Method of Provisioning a Global IPv6 Address for the WAN Link
- Configuring an Address-Assignment Pool for Use by DHCPv6 IA_NA
Published: 2013-07-09
Related Documentation
- M, MX Series
- IPv6 Addressing Requirements for a Dual-Stack Network
- Design 1: IPv6 Addressing with DHCPv6 IA_NA and DHCPv6 Prefix Delegation
- Methods for Obtaining IPv6 Global Addresses for DHCPv6 IA_NA
- Selecting the Method of Provisioning a Global IPv6 Address for the WAN Link
- Configuring an Address-Assignment Pool for Use by DHCPv6 IA_NA
