Navigation
Supported Platforms
Related Documentation
- MX Series
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Overview
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Topology
- Configuring VPLS Root Protection Topology Change Actions to Control Global Spanning Tree Behavior
- Configuring VPLS Root Protection Topology Change Actions to Control VLAN Spanning Tree Behavior
Example: Configuring VPLS Root Topology Change Actions
This example configures a bridge priority of 36k, a backup bridge priority of 44k, a priority hold time value of 60 seconds, a system identifier of 000203:040506 for IP address 10.1.1.1/32, and sets the bridge to flush the MAC cache on a topology change for MSTP only.
[edit]
protocols {mstp {bridge-priority 36k;backup-bridge-priority 44k;priority-hold-time 60;system-id 000203:040506 {10.1.1.1/32;}vpls-flush-on-topology-change;}}
 | Note: This is not a complete configuration. |
Related Documentation
- MX Series
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Overview
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Topology
- Configuring VPLS Root Protection Topology Change Actions to Control Global Spanning Tree Behavior
- Configuring VPLS Root Protection Topology Change Actions to Control VLAN Spanning Tree Behavior
Published: 2013-02-07
Supported Platforms
Related Documentation
- MX Series
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Overview
- VPLS Multihomed Layer 2 Ring and MPLS Infrastructure Topology
- Configuring VPLS Root Protection Topology Change Actions to Control Global Spanning Tree Behavior
- Configuring VPLS Root Protection Topology Change Actions to Control VLAN Spanning Tree Behavior
