Navigation
Example: Preventing Translation of Specific Addresses
The following configuration specifies that NAT is not performed on incoming traffic from the source address 192.168.20.24/32. Dynamic NAT is performed on all other incoming traffic.
[edit services nat]pool my-pool {address-range low 10.10.10.1 high 10.10.10.16;port-automatic;}rule src-nat {match-direction input;term t0 {from {source-address 192.168.20.24/32;}then {no-translation;}}term t1 {then {translated {translation-type dynamic-nat44;source-pool my-pool;}}}}
