Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- request system software abort
- EX, J, M, MX, T Series
- show chassis in-service-upgrade
request system software in-service-upgrade
Syntax
Release Information
Command introduced in Junos OS Release 9.0.
Description
Perform a unified in-service software upgrade (ISSU). A unified ISSU enables you to upgrade from one Junos OS Release to another with no disruption on the control plane and with minimal disruption of traffic. A unified ISSU is only supported by dual Routing Engine platforms. In addition, graceful Routing Engine switchover (GRES) and nonstop active routing (NSR) must be enabled.
Options
package-name | — | Location from which the software package or bundle is to be installed. For example:
|
no-old-master-upgrade | — | (Optional) When the no-old-master-upgrade option is included, after the backup Routing Engine is rebooted with the new software package and a switchover occurs to make it the new master Routing Engine, the former master (new backup) Routing Engine will not be upgraded to the new software. In this case, you must manually upgrade the former master (new backup) Routing Engine. If you do not include the no-old-master-upgrade option, the system will automatically upgrade the former master Routing Engine. |
reboot | — | (Optional) When the reboot option is included, the former master (new backup) Routing Engine is automatically rebooted after being upgraded to the new software. When the reboot option is not included, you must manually reboot the former master (new backup) Routing Engine using the request system reboot command. |
Additional Information
The following conditions apply to unified ISSUs:
- Unified ISSUs are supported on M120 and M320 routers, MX Series routers, T320 routers, and T640 routers only.
- Unsupported PICs are restarted during a unified ISSU. For information about supported PICs, see the Junos OS High Availability Configuration Guide.
- Unsupported protocols will experience packet loss during a unified ISSU. For information about supported protocols, see the Junos OS High Availability Configuration Guide.
- During a unified ISSU, you cannot bring any PICs online or offline.
For more information, see the Junos OS High Availability Configuration Guide.
Required Privilege Level
view
Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- request system software abort
- EX, J, M, MX, T Series
- show chassis in-service-upgrade
List of Sample Output
request system software-in-service upgrade rebootOutput Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request system software-in-service upgrade reboot
{master}
user@host> request system software in-service-upgrade
/var/tmp/jinstall-9.0-20080114.2-domestic-signed.tgz reboot
ISSU: Validating Image PIC 0/3 will be offlined (In-Service-Upgrade not supported) Do you want to continue with these actions being taken ? [yes,no] (no) yes ISSU: Preparing Backup RE Pushing bundle to re1 Checking compatibility with configuration Initializing... Using jbase-9.0-20080114.2 Verified manifest signed by PackageProduction_9_0_0 Using /var/tmp/jinstall-9.0-20080114.2-domestic-signed.tgz Verified jinstall-9.0-20080114.2-domestic.tgz signed by PackageProduction_9_0_0 Using jinstall-9.0-20080114.2-domestic.tgz Using jbundle-9.0-20080114.2-domestic.tgz Checking jbundle requirements on / Using jbase-9.0-20080114.2.tgz Verified manifest signed by PackageProduction_9_0_0 Using jkernel-9.0-20080114.2.tgz Verified manifest signed by PackageProduction_9_0_0 Using jcrypto-9.0-20080114.2.tgz Verified manifest signed by PackageProduction_9_0_0 Using jpfe-9.0-20080114.2.tgz Using jdocs-9.0-20080114.2.tgz Verified manifest signed by PackageProduction_9_0_0 Using jroute-9.0-20080114.2.tgz Verified manifest signed by PackageProduction_9_0_0 Hardware Database regeneration succeeded Validating against /config/juniper.conf.gz mgd: commit complete Validation succeeded Installing package '/var/tmp/jinstall-9.0-20080114.2-domestic-signed.tgz' ... Verified jinstall-9.0-20080114.2-domestic.tgz signed by PackageProduction_9_0_0 Adding jinstall... Verified manifest signed by PackageProduction_9_0_0 WARNING: This package will load JUNOS 9.0-20080114.2 software. WARNING: It will save JUNOS configuration files, and SSH keys WARNING: (if configured), but erase all other files and information WARNING: stored on this machine. It will attempt to preserve dumps WARNING: and log files, but this can not be guaranteed. This is the WARNING: pre-installation stage and all the software is loaded when WARNING: you reboot the system. Saving the config files ... NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install Installing the bootstrap installer ... WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the WARNING: 'request system reboot' command when software installation is WARNING: complete. To abort the installation, do not reboot your system, WARNING: instead use the 'request system software delete jinstall' WARNING: command as soon as this operation completes. Saving package file in /var/sw/pkg/jinstall-9.0-20080114.2-domestic-signed.tgz ... Saving state for rollback ... Backup upgrade done Rebooting Backup RE Rebooting re1 ISSU: Backup RE Prepare Done Waiting for Backup RE reboot GRES operational Initiating Chassis In-Service-Upgrade Chassis ISSU started ISSU: Backup RE Prepare Done ISSU: Preparing Daemons ISSU: Daemons Ready for ISSU ISSU: Starting Upgrade for FRUs ISSU: Preparing for Switchover ISSU: Ready for Switchover Checking In-Service-Upgrade status Item Status Reason FPC 0 Online (ISSU) FPC 1 Online (ISSU) FPC 2 Online (ISSU) FPC 6 Online (ISSU) FPC 7 Online (ISSU) Resolving mastership... Complete. The other routing engine becomes the master. ISSU: RE switchover Done ISSU: Upgrading Old Master RE Installing package '/var/tmp/paKEuy' ... Verified jinstall-9.0-20080114.2-domestic.tgz signed by PackageProduction_9_0_0 Adding jinstall... Verified manifest signed by PackageProduction_9_0_0 WARNING: This package will load JUNOS 9.0-20080114.2 software. WARNING: It will save JUNOS configuration files, and SSH keys WARNING: (if configured), but erase all other files and information WARNING: stored on this machine. It will attempt to preserve dumps WARNING: and log files, but this can not be guaranteed. This is the WARNING: pre-installation stage and all the software is loaded when WARNING: you reboot the system. Saving the config files ... NOTICE: uncommitted changes have been saved in /var/db/config/juniper.conf.pre-install Installing the bootstrap installer ... WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the WARNING: 'request system reboot' command when software installation is WARNING: complete. To abort the installation, do not reboot your system, WARNING: instead use the 'request system software delete jinstall' WARNING: command as soon as this operation completes. Saving package file in /var/sw/pkg/jinstall-9.0-20080114.2-domestic-signed.tgz ... cp: /var/tmp/paKEuy is a directory (not copied). Saving state for rollback ... ISSU: Old Master Upgrade Done ISSU: IDLE Shutdown NOW! Reboot consistency check bypassed - jinstall 9.0-20080114.2 will complete installation upon reboot [pid 30227] *** FINAL System shutdown message from root@host *** System going down IMMEDIATELY Connection to host closed.
Published: 2013-03-14
Related Documentation
- EX, J, M, MX, PTX, QFX, T Series
- request system software abort
- EX, J, M, MX, T Series
- show chassis in-service-upgrade