Navigation
Supported Platforms
request virtual-chassis member-id set (MX Series Virtual Chassis)
Syntax
request virtual-chassis member-id set member member-id
Release Information
Command introduced in Junos OS Release 11.2.
Description
Assign (set) a member ID to an MX Series router that you want to add as a member of a Virtual Chassis configuration.
 | Note: Issuing the command to assign a member ID causes the router to reboot, and requires you to confirm that you want to proceed with this operation. If you do not confirm the operation, the software cancels the command. |
Options
member member-id | — | Numeric value that identifies a member router in a Virtual Chassis configuration. When you assign a member ID to a router, assign the same member ID defined for this router in the MX Series Virtual Chassis preprovisioned configuration. Replace member-id with the value 0 or 1. |
Required Privilege Level
system-control
List of Sample Output
request virtual-chassis member-id setSample Output
request virtual-chassis member-id set
user@host> request virtual-chassis member-id
set member 0This command will enable virtual-chassis mode and reboot the system.
Continue? [yes,no] (no)
