Navigation
Supported Platforms
any-sender
Syntax
any-sender;
Hierarchy Level
[edit logical-systems logical-system-name protocols rip group group-name neighbor neighbor-name],[edit logical-systems logical-system-name routing-instances routing-instance-name protocols rip group group-name neighbor neighbor-name],[edit protocols rip group group-name neighbor neighbor-name],[edit routing-instances routing-instance-name protocols rip group group-name neighbor neighbor-name]
Release Information
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Description
Disable strict sender address checks.
If the sender of a RIP message does not belong to the subnet of the interface, the message is discarded. This situation might cause problems with dropped packets when RIP is running on point-to-point interfaces, or when the addresses on the interfaces do not fall in the same subnet. You can resolve this by disabling strict address checks on the RIP traffic.
 | Note: The any-sender statement is supported only for peer-to-peer interfaces. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
