Supported Platforms
lcc-mode
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 13.1 for TX Matrix Plus routers with 3D SIBs.
Description
Set the line-card chassis (LCC) in a routing matrix to function as a T1600 router or a T4000 router. If you set the value of the mode variable as empty, then the line-card chassis goes offline. If the mode statement is not configured, then by default the LCC functions as a T1600 router.
Default
If you do not include the lcc-mode statement, the LCC functions as a T1600 router.
Options
lcc number | — | On a TX Matrix Plus router, display hardware information for a specified router (line-card chassis) that is connected to the TX Matrix Plus router. Replace number with the following values depending on the LCC configuration:
|
mode mode | — | Configure the LCC to function as a T1600 or a T4000 router. The value of the mode variable can be set as t1600, t4000, or empty. |
Required Privilege Level
interface-control
