TechLibrary

Navigation

Supported Platforms

family family {access-concentrator name;address address;duplicate-protection;dynamic-profile profile-name;filter {adf {counter;input-precedence precedence;not-mandatory;output-precedence precedence;rule rule-value;}input filter-name {precedence precedence;}output filter-name {precedence precedence;}}mac-validate (loose | strict);max-sessions number;max-sessions-vsa-ignore;rpf-check {fail-filter filter-name;mode loose;}service { input { service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output { service-set service-set-name {service-filter filter-name;}}}service-name-table table-nameshort-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;unnumbered-address interface-name <preferred-source-address address>;}

[edit dynamic-profiles profile-name interfaces interface-name unit logical-unit-number]

Statement introduced in Junos OS Release 9.2.

Option pppoe introduced in Junos OS Release 11.2.

Configure protocol family information for the logical interface.

Note: Not all subordinate stanzas are available to every protocol family.

family—Protocol family:

The remaining statements are explained separately.

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.