Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

frame-mode (Dynamic Traffic Shaping)

Syntax

frame-mode (bytes | $junos-cos-byte-adjust | frame-mode-bytes frame-mode-bytes |$junos-cos-byte-adjust-frame);

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 10.2.

Variable $junos-cos-byte-adjust-frame introduced in Junos OS Release 13.1R1.

Description

Configure the mode to shape downstream ATM traffic based as frames.

Default

The default is frame-mode.

Options

bytes—Byte adjustment value for the cell-mode or frame-mode shaping options.

$junos-cos-byte-adjust—Predefined variable for byte adjustment that is replaced with a value obtained from the RADIUS server when a subscriber authenticates over the interface to which the dynamic profile is attached.

frame-mode-bytes frame-mode-bytes—Overhead bytes when in frame-mode. Traffic shaping is based on the number of bytes in the frame, without regard to cell encapsulation or padding overhead.

$junos-cos-byte-adjust-frame—Predefined variable for frame mode shaping. This variable can not be used when the overhead-accounting bytes bytes option is configured.

Best Practice: We recommend using the frame-mode-bytes frame-mode-bytes option rather than the bytes option.

Range: –120 through 124 bytes

Note: If you specify a value for the bytes bytes option, you cannot specify a value for either the frame-mode-bytes option.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-02-11

Previous Page Next Page