Navigation
Supported Platforms
Related Documentation
- Additional Information
- For information about configuring static group membership, see “Enabling IGMP Static Group Membership” in the Multicast Protocols Configuration Guide
group (Dynamic IGMP Interface)
Syntax
For group configuration with a source, use the following syntax:
For group configuration without a source, use the following syntax:
group group;
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.2.
Description
When configuring with a source address, configure the IGMP multicast group address that receives data on an interface and a source address for certain packets. For configuration without a source address, configure only the IGMP multicast group address that receives data on an interface.
Options
ip-address—Group IP address.
group—Name of group.
 | Note: You must specify a unique address for each group. |
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- Additional Information
- For information about configuring static group membership, see “Enabling IGMP Static Group Membership” in the Multicast Protocols Configuration Guide
Published: 2013-02-11
Supported Platforms
Related Documentation
- Additional Information
- For information about configuring static group membership, see “Enabling IGMP Static Group Membership” in the Multicast Protocols Configuration Guide
