Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Supported Platforms
Related Documentation
- J, M, MX, SRX, T Series
- For information about limiting the number of multicast group joins for an MLD logical interface, see “Configuring the Number of MLD Multicast Group Joins on Logical Interfaces” in the Multicast Protocols Configuration Guide
- MX Series
- Configuring a Dynamic Profile for Client Access
group-limit (Dynamic MLD Interface)
Syntax
group-limit limit;
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.4.
Description
Configure a limit for the number of multicast groups (or [S,G] channels in MLDv2) allowed on a dynamic logical interface. After this limit is reached, new reports will be ignored and all related flows are not flooded on the logical interface.
Default
By default, there is no limit to the number of multicast groups that can join the interface.
Options
limit—group limit value for the interface.
Range: 1 through 32767
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- J, M, MX, SRX, T Series
- For information about limiting the number of multicast group joins for an MLD logical interface, see “Configuring the Number of MLD Multicast Group Joins on Logical Interfaces” in the Multicast Protocols Configuration Guide
- MX Series
- Configuring a Dynamic Profile for Client Access
Published: 2013-02-11
Supported Platforms
Related Documentation
- J, M, MX, SRX, T Series
- For information about limiting the number of multicast group joins for an MLD logical interface, see “Configuring the Number of MLD Multicast Group Joins on Logical Interfaces” in the Multicast Protocols Configuration Guide
- MX Series
- Configuring a Dynamic Profile for Client Access
