Navigation
Supported Platforms
Related Documentation
- M, MX, PTX, T Series
- Configuring Hello Message Intervals for LMP Control Channels
- M, MX, PTX, SRX, T Series
- hello-interval (LMP)
hello-dead-interval
Syntax
hello-dead-interval milliseconds;
Hierarchy Level
[edit logical-systems logical-system-name protocols link-management peer peer-name lmp-protocol],[edit protocols link-management peer peer-name lmp-protocol]
Release Information
Statement introduced in Junos OS Release 8.0.
Description
Specify how long the Link Management Protocol (LMP) waits before declaring the control channel to be dead. This is an interval during which the router receives no LMP hello packets from the neighbor on a control that is active or up.
Options
milliseconds—Interval to wait before declaring the control channel to be dead.
Range: 500 through 300,000
Default: 500 milliseconds (three times the hello interval)
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- M, MX, PTX, T Series
- Configuring Hello Message Intervals for LMP Control Channels
- M, MX, PTX, SRX, T Series
- hello-interval (LMP)
Published: 2013-02-28
Supported Platforms
Related Documentation
- M, MX, PTX, T Series
- Configuring Hello Message Intervals for LMP Control Channels
- M, MX, PTX, SRX, T Series
- hello-interval (LMP)
