Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- M, MX, SRX, T Series
- multipath
lsp-equal-cost
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 9.6.
Description
Configure label-switched paths (LSPs) to be retained as equal cost paths for load balancing when a better path metric is found during the IS-IS internal routing table calculation.
When a route with an improved metric is added to the IS-IS internal routing table, IS-IS flushes all next-hop information (including LSP next-hop information) for a route. This is undesirable, because certain equal-cost multipath (ECMP) combinations can be lost during route calculation. To override this default IS-IS behavior, include the lsp-equal-cost statement for load balancing, so that the equal cost path information is retained in the routing table.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- M, MX, SRX, T Series
- multipath
Published: 2013-02-04
Related Documentation
- ACX, M, MX, PTX, QFX, T Series
- Example: Enabling IS-IS Traffic Engineering Support
- ACX, M, MX, PTX, QFX, SRX, T Series
- traffic-engineering
- M, MX, SRX, T Series
- multipath
