Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- encapsulation (Logical Interface)
- M, MX, T Series
- Configuring a Point-to-Multipoint Frame Relay Connection
- M Series
- dlci
- MX Series
- Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
multipoint-destination
Syntax
Hierarchy Level
Release Information
Statement introduced before Junos OS Release 7.4.
Description
For point-to-multipoint Frame Relay or ATM interfaces only, enable the support of multicast on the interface. You can configure multicast support on the interface if the Frame Relay or ATM switch performs multicast replication.
Options
address—Address of the remote side of the point-to-multipoint connection.
dlci-identifier—For Frame Relay interfaces, the data-link connection identifier.
Range: 0 through 0xFFFFFF (24 bits)
vci-identifier—For ATM interfaces, the virtual circuit identifier.
Range: 0 through 16,384
vpi-identifier—For ATM interfaces, the virtual path identifier.
Range: 0 through 255
Default: 0
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, T Series
- encapsulation (Logical Interface)
- M, MX, T Series
- Configuring a Point-to-Multipoint Frame Relay Connection
- M Series
- dlci
- MX Series
- Configuring a Point-to-Point ATM1 or ATM2 IQ Connection
Published: 2013-02-13
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, T Series
- encapsulation (Logical Interface)
- M, MX, T Series
- Configuring a Point-to-Multipoint Frame Relay Connection
- M Series
- dlci
- MX Series
- Configuring a Point-to-Point ATM1 or ATM2 IQ Connection