Supported Platforms
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- hello-interval (Protocols RSVP)
- M, PTX, T Series
- Configuring RSVP Node ID Hellos
no-interface-hello
Syntax
Hierarchy Level
Release Information
Statement introduced in JUNOS Release 10.0.
Description
Allows you to explicitly disable RSVP interface hellos globally on the router. This type of configuration might be necessary in networks where the Juniper Networks router has numerous RSVP connections with equipment from other vendors. However, if you disable RSVP interface hellos globally, you can also configure a hello interval on an RSVP interface using the hello-interval (Protocols RSVP) statement. This configuration disables RSVP interface hellos globally but enables RSVP interface hellos on the specified interface. This configuration might be necessary in a heterogeneous network where some devices support RSVP node ID hellos and other devices support RSVP interface hellos.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- hello-interval (Protocols RSVP)
- M, PTX, T Series
- Configuring RSVP Node ID Hellos
Published: 2013-02-28
Supported Platforms
Related Documentation
- ACX, M, MX, PTX, SRX, T Series
- hello-interval (Protocols RSVP)
- M, PTX, T Series
- Configuring RSVP Node ID Hellos
