Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- Using a Master Source Location for a Script
- ACX, EX, M, MX, PTX, QFX, SRX, T Series
- refresh-from (Op Scripts)
- source (Op Scripts)
refresh (Op Scripts)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 7.6.
Statement introduced in Junos OS Release 11.1 on the QFX Series.
Description
For Junos OS op scripts, overwrite the local copy
of all enabled op scripts or a single enabled script located in the /var/db/scripts/op directory with the copy located
at the source URL, specified in the source statement at
the same hierarchy level.
The update operation occurs as soon as you issue the set refresh configuration mode command. Issuing the set refresh command does not add the refresh statement to the configuration. Thus the command behaves like an operational mode command by executing an operation, instead of adding a statement to the configuration.
 | Note:
On the QFabric system, op scripts are stored in the |
Required Privilege Level
maintenance—To view this
statement in the configuration.
maintenance-control—To
add this statement to the configuration.
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- Using a Master Source Location for a Script
- ACX, EX, M, MX, PTX, QFX, SRX, T Series
- refresh-from (Op Scripts)
- source (Op Scripts)
Published: 2013-08-09
Supported Platforms
Related Documentation
- ACX, EX, M, MX, SRX, T Series
- Using a Master Source Location for a Script
- ACX, EX, M, MX, PTX, QFX, SRX, T Series
- refresh-from (Op Scripts)
- source (Op Scripts)
