Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

topology (Filter-Based Forwarding)

Syntax

topology topology-name;

Hierarchy Level

[edit firewall family (inet | inet6) filter filter-name term term-name then],[edit firewall family (inet | inet6) filter filter-name term term-name then logical-system logical-system-name],[edit firewall family (inet | inet6) filter filter-name term term-name then logical-system logical-system-name routing-instance routing-instance-name],[edit firewall family (inet | inet6) filter filter-name term term-name then routing-instance routing-instance-name]

Release Information

Statement introduced in Junos OS Release 9.0.

Description

Configure a topology for filter-based forwarding for multitopology routing. The firewall filter you apply to the ingress interface is used to look up traffic against the configured topology, and, if a route matches the conditions you configure for the term, the route is accepted and added to the routing table for the specific topology.

There are multiple ways to configure a topology for filter-based forwarding, depending on the type of instance or logical system you want to specify for the forwarding class.

Note: The options for logical system and routing instance precede the topology statement with the then statement.

Options

topology-name—Name of a topology against which you want to match traffic.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-02-02

Previous Page Next Page