Navigation
Supported Platforms
Related Documentation
- Additional Information
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces
unit (Dynamic Demux Interface)
Syntax
unit logical-unit-number { demux-options {underlying-interface interface-name}family family {access-concentrator name;address address;demux-source {source-address;}duplicate-protection;dynamic-profile profile-name;filter {input filter-name;output filter-name;}mac-validate (loose | strict):max-sessions number;max-sessions-vsa-ignore;rpf-check {fail-filter filter-name;mode loose;}service-name-table table-nameshort-cycle-protection <lockout-time-min minimum-seconds lockout-time-max maximum-seconds>;unnumbered-address interface-name <preferred-source-address address>;}filter {input filter-name;output filter-name;}}
vlan-id number;Hierarchy Level
[edit dynamic-profiles profile-name interfaces demux0]
Release Information
Statement introduced in Junos OS Release 9.3.
Description
Configure a dynamic logical interface on the physical device. You must configure a logical interface to be able to use the physical device.
Options
logical-unit-number—Either the specific unit number of the interface or the unit number variable ($junos-interface-unit). The variable is used to specify the unit of the interface when a new demux interface is dynamically created. The static unit number variable is dynamically replaced with the unit number that DHCP supplies when the subscriber logs in.
The remaining statements are explained separately.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
- Additional Information
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces
Published: 2013-02-13
Supported Platforms
Related Documentation
- Additional Information
- For information about static IP demux interfaces, see the Junos® OS Network Interfaces
