Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

TechLibrary
Navigation

Supported Platforms

 

Related Documentation

 

unit (Dynamic PPPoE)

Syntax

unit logical-unit-number {keepalives interval seconds;no-keepalives;pppoe-options {underlying-interface interface-name;server;}ppp-options {authentication [ authentication-protocols ];chap {challenge-length minimum minimum-length maximum maximum-length;}pap;}family inet {unnumbered-address interface-name destination address;address address;service {input {service-set service-set-name {service-filter filter-name;}post-service-filter filter-name;}output {service-set service-set-name {service-filter filter-name;}}}filter {input filter-name {precedence precedence;}output filter-name {precedence precedence;}}}filter {input filter-name;output filter-name;}}

Hierarchy Level

[edit dynamic-profiles profile-name interfaces pp0]

Release Information

Statement introduced in Junos OS Release 10.1.

Description

In a dynamic profile, configure a logical unit number for the dynamic PPPoE logical interface. You must configure a logical interface to be able to use the router.

Options

logical-unit-number—Variable used to specify the unit number when the PPPoE logical interface is dynamically created. In the unit logical-unit-number statement for dynamic PPPoE logical interfaces, you must use the predefined variable $junos-interface-unit in place of logical-unit-number. The $junos-interface-unit predefined variable is dynamically replaced with the unit number supplied by the router when the subscriber logs in.

The remaining statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

 

Related Documentation

 

Published: 2013-02-12

Supported Platforms

 

Related Documentation

 

Published: 2013-02-12

Previous Page Next Page