Rate and give feedback:  Feedback Received. Thank You!

Rate and give feedback: 

X

This document helped resolve my issue

Yes No

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:  

E-mail: 

Enter a valid Email ID

Need product assistance? Contact Juniper Support

Submit

This site is protected by hCaptcha and its Privacy Policy and Terms of Service apply.

English  

English

System Requirements for a Routing Matrix with a TX Matrix Plus Router

• One to four Juniper Networks T1600 Core Routers—Junos OS Release 9.6 or later is required.
  • The TX Matrix Plus router must contain the following components:
    • Two C2600 Routing Engines—Model RE-DUO-C2600-16G
    • Two LCC-CB Control Boards (CBs)—Model CB-LCC
    • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-F13
    • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-F2S
  • The T1600 router must contain the following components:
    • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G
    • Two LCC-CB Control Boards (CBs)—Model CB-LCC
    • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-T1600
    • One rear fan tray—Model FAN-REAR-TXP-LCC
• Up to eight Juniper Networks T1600 Core Routers—Junos OS Release 13.1 or later is required.
  • The TX Matrix Plus router must contain the following components:
    • Two C2600 Routing Engines—Model RE-DUO-C2600-16G
    • Two LCC-CB Control Boards (CBs)—Model CB-LCC
    • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F13
    • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F2S
    • Fan tray—Model PWR-TRAY-TXP-5-60-DC
  • The T1600 router must contain the following components:
    • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G
    • Two LCC-CB Control Boards (CBs)—Model SIB-TXP-3D-LCC
    • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-3D-T1600
    • One rear fan tray—Model FAN-REAR-TXP-3D-LCC
    • Two power supplies—PWR-T-6-60-DC

  For information about upgrading a standalone T1600 router and integrating it into a routing matrix, see the TX Matrix Plus Router Hardware Guide .

• Two to four Juniper Networks T4000 Core Routers—Junos OS Release 13.1 or later is required.
  • The TX Matrix Plus router must contain the following components:
    • Two C2600 Routing Engines—Model RE-DUO-C2600-16G
    • Two LCC-CB Control Boards (CBs)—Model CB-LCC
    • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F13
    • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F2S
    • Fan tray—Model PWR-TRAY-TXP-5-60-DC
  • The T4000 router must contain the following components:
    • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G
    • Two LCC-CB Control Boards (CBs)—Model SIB-TXP-3D-LCC
    • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-3D-T1600
    • One rear fan tray—Model FAN-REAR-TXP-3D-LCC
    • Two power supplies—PWR-T-6-60-DC

  For information about upgrading a standalone T1600 router and integrating it into a routing matrix, see the TX Matrix Plus Router Hardware Guide .

• Physical Interface Cards (PICs) of your choice. To view a list of supported PICs, see the T1600 Core Router PIC Guide .