Related Documentation
- M, MX, SRX, T Series
- aggregated-ether-options
- Additional Information
- Junos® OS Ethernet Interfaces
Configuring Aggregated Ethernet Link Speed
On aggregated Ethernet interfaces, you can set the required link speed for all interfaces included in the bundle. All interfaces that make up a bundle must be the same speed. If you include in the aggregated Ethernet interface an individual link that has a speed different from the speed you specify in the link-speed parameter, an error message will be logged.
To set the required link speed:
- Specify that you want to configure the aggregated Ethernet
options.user@host# edit interfaces interface-name aggregated-ether-options
- Configure the link speed.[edit interfaces interface-name aggregated-ether-options ]user@host# set link-speed speed
speed can be in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Aggregated Ethernet interfaces on the M120 router can have one of the following speed values:
- 100m—Links are 100 Mbps.
- 10g—Links are 10 Gbps.
- 1g—Links are 1 Gbps.
- OC192—Links are OC192 or STM64c.
Aggregated Ethernet links on EX Series switches can be configured to operate at one of the following speeds:
- 10m
- 100m
- 1g
- 10g
- 50g
Related Documentation
- M, MX, SRX, T Series
- aggregated-ether-options
- Additional Information
- Junos® OS Ethernet Interfaces
Published: 2013-02-13
Related Documentation
- M, MX, SRX, T Series
- aggregated-ether-options
- Additional Information
- Junos® OS Ethernet Interfaces
