Navigation
Related Documentation
- M, MX, PTX, QFX, T Series
- Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different Interface Types
- M, MX, PTX, T Series
- Configuring the Junos OS to Disable the Physical Operation of the Craft Interface
Silencing External Devices Connected to Alarm Relay Contacts
You can manually silence external devices connected to alarm relay contacts. To silence an external devices, press the alarm cutoff button located on the craft interface front panel of the device.
Silencing the device does not remove the alarm messages from the display (if present on the router or switch) or extinguish the alarm LEDs. In addition, new alarms that occur after an external device is silenced reactivate the external device.
Related Documentation
- M, MX, PTX, QFX, T Series
- Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different Interface Types
- M, MX, PTX, T Series
- Configuring the Junos OS to Disable the Physical Operation of the Craft Interface
Published: 2013-03-07
Related Documentation
- M, MX, PTX, QFX, T Series
- Configuring the Junos OS to Determine Conditions That Trigger Alarms on Different Interface Types
- M, MX, PTX, T Series
- Configuring the Junos OS to Disable the Physical Operation of the Craft Interface
