Navigation
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
Configuring Input SCU on the vt Interface of the Egress PE Router
To enable SCU in a Layer 3 VPN, configure source class usage on the virtual loopback tunnel (vt) interface of the egress PE router that is either configured for or equipped with a Tunnel PIC. The interface is equivalent to the inbound SCU interface, so use the input statement at the [edit interfaces vt-interface-number unit 0 family inet accounting source-class-usage] hierarchy level:
[edit]interfaces {vt-0/3/0 {unit 0 {family inet {accounting {source-class-usage {input;}}}}}}
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
Published: 2012-12-03
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
