Navigation
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
Configuring SCU on the Output Interface
Since VPN traffic enters the egress router through the VPN loopback tunnel interface, you still need to determine the exit interface for this traffic. To complete your SCU configuration, configure the output version of source class usage on the exit interface of your egress router:
[edit interfaces]at-1/1/0 {unit 0 {family inet {accounting {source-class-usage {output;}}}}}
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
Published: 2012-12-03
Related Documentation
- M, MX, T Series
- Overview of Source Class Usage
- System Requirements for SCU
- Roadmap for Configuring SCU with Layer 3 VPNs
- Example: SCU with Layer 3 VPNs Configuration
- Additional Information
- Source Class Usage
