Supported Platforms
Related Documentation
Enabling Multiple Subscribers on a VLAN Logical Interface for All Static Subscribers
For a given interface, only a single static subscriber (or group) is logged in. Although we do not recommend this practice, you might have other kinds of subscribers configured on the same interface, such as a DHCP subscriber managed by the DHCP application. You can use the aggregate-clients statement to extend the dynamic profile for all static subscribers to enable multiple subscribers to share the same VLAN logical interface.
You can specify that attributes (such as CoS or firewall) for the multiple subscribers are merged for the logical interface. That is, the profiles for multiple subscribers of different types are instantiated on the interface, but the profile attributes of each are merged together. Alternatively, you can specify that the instantiated profile for the current subscriber is replaced by the profile of a new subscriber that logs in using the same logical interface. This configuration can be overridden for a group of static subscribers when a different configuration is applied for that group.
To enable multiple subscribers to share the same VLAN logical interface for all static subscribers, do one of the following:
- Specify that the multiple subscriber attributes are merged
for the logical interface.[edit system services static-subscribers dynamic-profile dyn-profile-1]user@host# set aggregate-clients merge
- Specify that the entire logical interface is replaced
when a new subscriber logs into the network using the same VLAN logical
interface.[edit system services static-subscribers dynamic-profile dyn-profile-3]user@host# set aggregate-clients replace
