Supported Platforms
Adjusting the CoS Shaping Rate and Overhead Accounting Parameters for Agent Circuit Identifier-Based Dynamic VLANs
You can configure the router to use either or both of the Actual-Data-Rate-Downstream [26-130] or Access-Loop-Encapsulation [26-144] DSL Forum vendor-specific attribute (VSA) values in PPPoE control packets to adjust the CoS shaping-rate and overhead-accounting attributes, respectively, for dynamic agent circuit identifier (ACI) interface sets and their associated ACI-based dynamic VLAN subscriber interfaces.
Before you begin:
- To configure adjustment of the CoS shaping rate and overhead accounting attributes on a per-household basis, create a dynamic profile that defines the dynamic ACI interface set.
- To configure adjustment of the CoS shaping rate and overhead
accounting attributes on a per-subscriber basis, create a dynamic
profile that defines the ACI-based dynamic PPPoE (pp0)
subscriber interface associated with the ACI interface set.
See Configuring Dynamic VLAN Subscriber Interfaces Based on Agent Circuit Identifier Information.
To configure the router to use the Actual-Data-Rate-Downstream or Access-Loop-Encapsulation VSA values in PPPoE control packets to adjust the CoS shaping-rate and overhead-accounting attributes for dynamic ACI interface sets and associated ACI-based dynamic VLAN subscriber interfaces, do either or both of the following:
- In a dynamic profile for an ACI interface set or a dynamic
profile for an ACI-based PPPoE subscriber interface, configure adjustment
of the CoS shaping-rate attribute based on the value of the Actual-Data-Rate-Downstream
VSA.[edit dynamic-profiles profile-name class-of-service dynamic-class-of-service-options]user@host# set vendor-specific-tags actual-data-rate-downstream
- In a dynamic profile for an ACI interface set or a dynamic
profile for an ACI-based PPPoE subscriber interface, configure adjustment
of the CoS overhead-accounting attribute based on the value of the
Access-Loop-Encapsulation VSA.[edit dynamic-profiles profile-name class-of-service dynamic-class-of-service-options]user@host# set vendor-specific-tags access-loop-encapsulation
