Navigation
Supported Platforms
Related Documentation
Configuring the Match Order for Fast Update Filters
You must include the match-order statement to explicitly specify the order in which router examines the match conditions. The router examines only those match conditions that you include in the statement. You can match a maximum of five conditions.
 | Note: If the match-order statement contains a condition that is not specified in the from statement of a term, the router considers that a wildcard for that condition. If you use the same fast update filter in multiple dynamic profiles, you must configure the same match order for all profiles. |
To configure the order in which the router examines the match conditions of a fast update filter:
- Access the fast update filter:[edit dynamic-profiles myProfile]user@host# edit firewall family inet fast-update-filter httpFilter
- Specify the mandatory interface-specific statement. [edit dynamic-profiles myProfile firewall family inet fast-update-filter httpFilter]user@host# set interface-specific
- Configure the match order for the match conditions in
the filter. Use brackets to enclose multiple match conditions.[edit dynamic-profiles myProfile firewall family inet fast-update-filter httpFilter]user@host# set match-order [source-address protocol destination-port]
