Navigation
Supported Platforms
Related Documentation
- For general information about configuring an IP demux underlying interface, see the Junos® OS Network Interfaces.
Configuring Static Subscriber Interfaces Using IP Demux Interfaces
You can configure a subscriber interface using a statically created IP demux interface. This interface can be referenced in a dynamic profile.
To configure a static IP demux subscriber interface:
- Configure the IP demux interface on a physical device represented by a logical unit number. The logical interface resides on a physical device.
- Configure the underlying interface on which the IP demux interface is running.
- Specify the underlying interface on which the IP demux interface is running.
- Specify how ingress IPv4 traffic is to be demultiplexed based on packet destination or source addresses.
- Associate the static subscriber interface in a dynamic
profile.
See Associating Dynamic Profiles with Statically Created Interfaces.
 | Note: VLAN demux interfaces currently support the Internet Protocol version 4 (IPv4) suite (family inet) and the Internet Protocol version 6 (IPv6) suite (family inet6). |
Related Documentation
- For general information about configuring an IP demux underlying interface, see the Junos® OS Network Interfaces.
Published: 2013-02-11
Supported Platforms
Related Documentation
- For general information about configuring an IP demux underlying interface, see the Junos® OS Network Interfaces.
