Navigation
Starting a One-Way ETH-DM Session
To start a one-way Ethernet frame delay measurement session, enter the monitor ethernet delay-measurement one-way command from operational mode, and specify the peer MEP by its MAC address or by its MEP identifier.
For example:
user@host> monitor ethernet delay-measurement
one-way 00:05:85:73:39:4a maintenance-domain md6 maintenance-association
ma6 count 10One-way ETH-DM request to 00:05:85:73:39:4a, Interface xe-5/0/0.0 1DM Frames sent : 10 --- Delay measurement statistics --- Packets transmitted: 10 Average delay: NA, Average delay variation: NA Best case delay: NA, Worst case delay: NA
 | Note: If you attempt to monitor delays to a nonexistent MAC address, you must type Ctrl + C to explicitly quit the monitor ethernet delay-measurement command and return to the CLI command prompt. |
