Navigation
Related Documentation
- ACX, M, MX, PTX, T Series
- show oam ethernet connectivity-fault-management interfaces
Displaying ETH-DM Frame Counts for MEPs by Interface or Domain Level
Purpose
Display ETH-DM frame counts for CFM maintenance association end points (MEPs).
By default, the show oam ethernet connectivity-fault-management interfaces command displays CFM database information for MEPs attached to CFM-enabled Ethernet interfaces on the router or at a maintenance domain level. For Ethernet interfaces that support ETH-DM, any frame counts are also displayed when you specify the detail or extensive command option.
 | Note: At the router attached to the initiator MEP for a one-way session, or at the router attached to the receiver MEP for a two-way session, you can only display ETH-DM frame counts. |
Action
- To display CFM database information (including ETH-DM
frame counts) for all MEPs attached to CFM-enabled Ethernet interfaces
on the router:
user@host> show oam ethernet connectivity-fault-management interfaces detail - To display CFM database information (including ETH-DM
frame counts) only for the MEPs attached to CFM-enabled router interface ge-5/2/9.0:
user@host> show oam ethernet connectivity-fault-management interfaces ge-5/2/9.0 detail - To display CFM database information (including ETH-DM
frame counts) only for MEPs enclosed within CFM maintenance domains
(MDs) at level 6:
user@host> show oam ethernet connectivity-fault-management interfaces level 6 detail
Related Documentation
- ACX, M, MX, PTX, T Series
- show oam ethernet connectivity-fault-management interfaces
