Navigation
Supported Platforms
Configuring SONET/SDH Parameters on ATM Interfaces
When configuring ATM1 and ATM2 IQ SONET/SDH interfaces, you can also include the following statements in the sonet-options statement to set SONET/SDH parameters on ATM interfaces:
[edit interfaces at-fpc/pic/port]
sonet-options {aps {advertise-interval milliseconds;authentication-key key;force;hold-time milliseconds;lockout;neighbor address;paired-group group-name;protect-circuit group-name;request;revert-time seconds;working-circuit group-name;}bytes {e1-quiet value;f1 value;f2 value;s1 value;z3 value;z4 value;}loopback (local | remote);(payload-scrambler | no-payload-scrambler);rfc-2615;trigger {defect ignore {hold-time up milliseconds down milliseconds;}}(z0-increment | no-z0-increment);}
For information about configuring specific SONET/SDH statements, see SONET/SDH Interfaces Overview.
