Using Alarms
You can monitor active alarms on the J-Web interface .The View Alarms page alerts you about conditions that might prevent the routing platform from operating normally. The page displays information about active alarms, the severity of the alarms, the time at which the alarm began, and a brief description for each active alarm. Alternatively, you can use the CLI to view alarms on all routing platforms. An alarm indicates that you are running the routing platform in a manner that is not recommended. When you see an alarm, you must check its cause and remedy it.
Alternatively, you can display alarm information by entering the following commands at the J-Web CLI terminal:
- show chassis alarms
- show system alarms
For more information, see Using the CLI Terminal. For more information about the commands, see the Junos OS Operational Mode Commands.
