Navigation
Example: Minimum Extended DHCP Local Server Configuration
This example shows the minimum configuration you need to use for the extended DHCP local server on the router or switch:
[edit system services]
dhcp-local-server {group group_one {interface fe-0/0/2.0;}}
 | Note: The interface type in this topic is just an example. The fe- interface type is not supported by EX Series switches. |
This example creates the server group named group_one, and specifies that the DHCP local server is enabled on interface fe-0/0/2.0 within the group. The DHCP local server uses the default pool match configuration of ip-address-first.
| Note: If you delete the DHCP server configuration, DHCP server bindings might still remain. To ensure that DHCP bindings are removed, issue the clear dhcp server binding command before you delete the DHCP server configuration. |
