Navigation
Example: Configuring Channelized T1 IQ and IQE Interfaces
Configure a channelized T1 interface as an unpartitioned, clear channel.
Configuring a T1 Interface
[edit interfaces]
ct1-2/0/0 {no-partition interface-type t1; # t1-2/0/0}
Configure a partitioned channel group.
Configuring a Channel Group
[edit interfaces]
ct1-0/0/1 {partition 1 interface-type ds0 timeslots 1-10;partition 2interface-type ds0 timeslots 11-20;}
The following configuration is sufficient to get the channelized T1 IQ or IQE interface up and running:
Configuring Multiple Interface Types
[edit]
interfaces {ct1-1/2/3 {partition 1 timeslots 10 interface-type ds; # ds-1/2/3:1partition 2 timeslots 1-9 interface-type ds; # ds-1/2/3:2}ds-1/2/3:1 {unit 0 {family inet {address 10.25.1.2/24;}}}ds-1/2/3:2 {unit 0 {family inet {address 10.25.2.2/24;}}}}
[edit]interfaces {ct1-1/2/6 {no-partition interface-type t1; # t1-1/2/6}t1-1/2/6 {t1-options {timeslots 1-2;}unit 0 {family inet {address 10.255.126.2/24;}}}}
