Supported Platforms
clear auto-configuration interfaces interface-set
Syntax
Release Information
Command introduced in Junos OS Release 12.2.
Description
Clear a specified dynamic agent circuit identifier (ACI) interface set on the router. An ACI interface set is a logical collection of dynamic VLAN subscriber interfaces that originate at the same household or on the same access-loop port.
You can clear only those ACI interface sets that have no active subscriber interface members. If the ACI interface set that you want to clear still has valid member interfaces, you must first remove these interfaces before issuing the clear auto-configuration interfaces interface-set interface-set-name command.
Options
interface-set-name | — | Name of the empty ACI interface set that you want to clear. Use the ACI interface set name generated by the router, such as aci-1003-ge-1/0/0.4001, and not the actual agent circuit identifier string found in the DHCP or PPPoE control packets. To view the names of the ACI interface sets configured on the router, you can issue the show subscribers command. |
Required Privilege Level
view
List of Sample Output
clear auto-configuration interfaces interface-setclear auto-configuration interfaces interface-set (Error Message for ACI Interface Set with Active Members)
Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
clear auto-configuration interfaces interface-set
user@host> clear auto-configuration interfaces
interface-set aci-1003-ge-1/0/0.4001Interface-set aci-1003-ge-1/0/0.4001 deleted
clear auto-configuration interfaces interface-set (Error Message for ACI Interface Set with Active Members)
user@host> clear auto-configuration interfaces
interface-set aci-1005-ge-1/0/0.2800error: Interface set aci-1005-ge-1/0/0.2800 has references.
